Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
Interesting, because when they were relatively new, they were also the cheap option. Sous vide used to be a $1000+ thing. I did a DIY version for around $200, but later Anova came out and it was less sketchy than my box of wires running mains voltage.
Instant Pot seems to make a pretty good one that fits around the sides of their pressure cookers.
Anova’s app is basically useless. Could be nice for looking up temperatures and times for specific things, but I usually google it, anyway. Steaks are by far the most common thing I do sous vide, so it’s usually preset for that. Never used the app outside of playing with it when I first got it.
One thing is for sure: I won’t be recommending Anova to friends anymore.
Oh, that’s just the sealed bag like normal. Back then, I was using special ziploc bags with a port for a small hand pump. They seem to have stopped making those, and I switched to a regular vacuum sealer.
The diy part was the heater/pump. I based it on this:
The problem with this design is that because it sits above the hot water, it tends to have a lot of condensation build up inside the housing. So I rebuilt it to have power plugs for the teacup heaters and pump. Then it could be set to the side, and I could use more heaters for larger containers.
Interesting, because when they were relatively new, they were also the cheap option. Sous vide used to be a $1000+ thing. I did a DIY version for around $200, but later Anova came out and it was less sketchy than my box of wires running mains voltage.
Instant Pot seems to make a pretty good one that fits around the sides of their pressure cookers.
Anova’s app is basically useless. Could be nice for looking up temperatures and times for specific things, but I usually google it, anyway. Steaks are by far the most common thing I do sous vide, so it’s usually preset for that. Never used the app outside of playing with it when I first got it.
One thing is for sure: I won’t be recommending Anova to friends anymore.
Instan pot didn’t continue to update their app three years ago and I now have a useless Insta pot.
I don’t think I ever touched an app for my Insta Pot or its sous vide attachment, but maybe the newer ones have to?
explain how the waterproofing+heatproofing on sous DIY sous vide work. I must know.
Oh, that’s just the sealed bag like normal. Back then, I was using special ziploc bags with a port for a small hand pump. They seem to have stopped making those, and I switched to a regular vacuum sealer.
The diy part was the heater/pump. I based it on this:
https://makezine.com/projects/sous-vide-immersion-cooker/
The problem with this design is that because it sits above the hot water, it tends to have a lot of condensation build up inside the housing. So I rebuilt it to have power plugs for the teacup heaters and pump. Then it could be set to the side, and I could use more heaters for larger containers.
Well… who knows how long until we start getting billed for that, too.