Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
Oh, that’s just the sealed bag like normal. Back then, I was using special ziploc bags with a port for a small hand pump. They seem to have stopped making those, and I switched to a regular vacuum sealer.
The diy part was the heater/pump. I based it on this:
The problem with this design is that because it sits above the hot water, it tends to have a lot of condensation build up inside the housing. So I rebuilt it to have power plugs for the teacup heaters and pump. Then it could be set to the side, and I could use more heaters for larger containers.
Oh, that’s just the sealed bag like normal. Back then, I was using special ziploc bags with a port for a small hand pump. They seem to have stopped making those, and I switched to a regular vacuum sealer.
The diy part was the heater/pump. I based it on this:
https://makezine.com/projects/sous-vide-immersion-cooker/
The problem with this design is that because it sits above the hot water, it tends to have a lot of condensation build up inside the housing. So I rebuilt it to have power plugs for the teacup heaters and pump. Then it could be set to the side, and I could use more heaters for larger containers.