Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
Can you come point to 6.6666mm on my metric tape measure here?
Yes: For woodworkers, it’s identical to 6.5mm, accurately eyeballed at between 6 and 5mm. Don’t pretend you’re a machinist. Does your tape measure even have a vernier scale. Does it make satisfying clicks when measuring. If you have a slip instead of interference fit just dump one piece in water for a second it’ll be fine.
Yes: For woodworkers, it’s identical to 6.5mm, accurately eyeballed at between 6 and 5mm. Don’t pretend you’re a machinist. Does your tape measure even have a vernier scale. Does it make satisfying clicks when measuring. If you have a slip instead of interference fit just dump one piece in water for a second it’ll be fine.
To be more precise, it should be rounded as 6.7 cm, accurately eyeballed at between 6.6 cm and 6.7 cm.