Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
It’s really hard to break into it. Being accurate enough to print at 300dpi is very difficult, and that’s not particularly impressive. If it’s color, then the problems are multiplied. You have to precisely align four different print heads (minimum), and the ink needs to be mixed just right for accurate colors.
This is also why you don’t see open source 2d printers like you do for 3d printers. On the surface, adding a third dimension seems like it’d make things more complicated, but 3d printers don’t need the level of accuracy that 2d printers do.
The real question here is where are the Chinese printers?! I mean, it’s a big market, why aren’t they getting into it?
Xiaomi makes a couple of expensive standard inkjets, but mostly they make photo printers. That’s the only one I can think of.
It’s really hard to break into it. Being accurate enough to print at 300dpi is very difficult, and that’s not particularly impressive. If it’s color, then the problems are multiplied. You have to precisely align four different print heads (minimum), and the ink needs to be mixed just right for accurate colors.
This is also why you don’t see open source 2d printers like you do for 3d printers. On the surface, adding a third dimension seems like it’d make things more complicated, but 3d printers don’t need the level of accuracy that 2d printers do.
But I would think TVs and microchips are more complicated than printers. And those two have been cracked by the Chinese.