Have you ensured that your setup will pass email authentication processes?
It has been a long time since email from random hosts is accepted for forwarding or delivery. This Wikipedia may help https://en.wikipedia.org/wiki/Email_authentication
Have you ensured that your setup will pass email authentication processes?
It has been a long time since email from random hosts is accepted for forwarding or delivery. This Wikipedia may help https://en.wikipedia.org/wiki/Email_authentication
The BBC News RSS feeds seem to be at https://www.bbc.co.uk/news/10628494 The page content seems to be old but the feed contents looks up to date.
My guesstimate is you have around 1,400 4K DVD rips. Do you need all of them?
You probably should look at RAID 6 with a cold spare (i.e. a drive sitting alongside the server.
ZFS allows you to create spare disks. ZFS spare disks are hot spares which are swapped in for faulty disks and swapped out when you replace the faulty disk.
I suggest that you calculate the cost to build this server, you should allow for NAS specific drives rather than the cheapest desktop drives.
You will need PCI to SATA cards to connect you drives.
I suggest that you look at the NAS builds on PC Part Picker.
Have a look at these pages
https://www.wundertech.net/diy-nas-build-guide/ https://nascompares.com/guide/build-your-own-nas-in-2024-should-you-bother/ https://www.storagereview.com/review/how-to-build-a-diy-nas-with-truenas-core
Finally check how much power and heat the server will produce. A server with that many drives will loud.
There is another piece in their library that may be more appropriate “AI Took My Job”
https://app.suno.ai/song/14572e0f-a446-4625-90ff-3676a790a886/
[EDIT - fixed missing words]
I would look for a printer that supports Web Services for Devices (WSD) or Airscan (eSCL). These protocol allows you setup a scanner without installing a driver.
Here are a couple of starting points for sane-airscan. I discovered it long after I had installed the drivers for my all-in-one.
https://wiki.archlinux.org/title/SANE#Sharing_your_scanner_over_a_network
https://manpages.ubuntu.com/manpages/jammy/man5/sane-airscan.5.html
Have a look at the size of the Finnish waste repository.
“They’ll hold a total of 5,500 tonnes of waste,” says Joutsen. “So Onkalo will take all the high-level nuclear waste produced by Finland’s five nuclear power plants in their entire life cycles.”
The Finnish repository is designed with a life of 100,000 years. Homo sapiens (i.e us) have existed for about 300,000 years.
Article about the problems warnings that will comprehensible in 10,000 years https://www.bbc.com/future/article/20200731-how-to-build-a-nuclear-warning-for-10000-years-time
Chrome reports the memory a tab uses if you hover over the tab. Look at the task manager within your browser. Try clicking on the burger bar, then “More tools” and “Task Manager” within the browser.
The Tweaks application has a switch to enable maximize buttons on windows https://itsfoss.com/gnome-minimize-button/
Gnome has workspaces. I currently 3 workspaces open. I regularly have four or more open. https://help.gnome.org/users/gnome-help/stable/shell-workspaces.html.en
As @[email protected] says you may be able to do this with find
command. This command lists all PDF files under ~/tmp that were created more than 7 days ago and does a directory listing. You could use this as a basis to move create an archive of individual files.
find ~/tmp -ctime +7 -iname "*pdf" -exec ls -rlht {} \;
The find
command also has a -delete
flag.
I have in the past used this combination to implement file management. I don’t have access to the script any more. I don’t remember why we used a shell script rather than logrotate as per @[email protected]
Go to https://rpilocator.com/ and filter by your “region” and check for yourself. Most models seems to be available. The Rapsberry Pi 5 is available for pre-order from a number of suppliers.
I have pre-ordered one for delivery in October. If you look at https://rpilocator.com/ you will find various models in stock at the official price. The Raspberry Pi clearly isn’t the tool for you
YMMV, but here are some reasons
I have a laptop that belongs to my employer and a personal Linux laptop. It is quicker to use the Linux machine than to work out if I can now install WSL 2 or find a Linux instance to do some Linux work.
I searched for “nicotine addiction” and found a number of links to reputable bodies. I have put some of them above.
Some sources disagree with your claim.
Mayo Clinic
Nicotine dependence occurs when you need nicotine and can’t stop using it. Nicotine is the chemical in tobacco that makes it hard to quit. Nicotine produces pleasing effects in your brain, but these effects are temporary. So you reach for another cigarette.
The more you smoke, the more nicotine you need to feel good. When you try to stop, you experience unpleasant mental and physical changes. These are symptoms of nicotine withdrawal.
https://www.mayoclinic.org/diseases-conditions/nicotine-dependence/symptoms-causes/syc-20351584
Centre for Addition and Public Health
In the past, it was believed that because nicotine does not cause intoxication or impairment, using tobacco was simply a bad habit, not an addiction. Today, nicotine is recognized as the very addictive drug found in tobacco products.
Nicotine dependence (also called tobacco addiction) involves physical and psychological factors that make it difficult to stop using tobacco, even if the person wants to quit.
https://www.camh.ca/en/health-info/mental-illness-and-addiction-index/nicotine-dependence
John Hopkins
Both e-cigarettes and regular cigarettes contain nicotine, which research suggests may be as addictive as heroin and cocaine. What’s worse, says Blaha, many e-cigarette users get even more nicotine than they would from a combustible tobacco product: Users can buy extra-strength cartridges, which have a higher concentration of nicotine, or increase the e-cigarette’s voltage to get a greater hit of the substance.
From the Windows Community
Does Windows 11 allow Windows 95 compatible computer games? … It really depends on the game, you might get some working, some might not. It is really case by case basis unfortunately.
It appears that people may have to use virtual machines to run some Windows 95 software https://www.groovypost.com/howto/run-old-apps-on-windows-11/ The article doesn’t mention using HyperV only 3rd party software.
I prefer Linux simply but it isn’t my tribe.
Took a couple of minutes to find the information above
The official docs for Toon Boom Harmony 22 seem to have a page on how to install under Linux (RHEL or CentOS 6 or 7).
https://docs.toonboom.com/help/harmony-22/advanced/installation/basic/linux/about-basic-installation-linux.html https://docs.toonboom.com/help/harmony-22/advanced/installation/basic/linux/install-on-linux.html
You may get it working under Mint but it won’t be supported.
You may have to look at a virtual machine or just put up with Windows because you need this software.
It took 6 years for the Carlton Tavern to be rebuilt. I think this was the first pub ordered to be rebuilt.
The building was being considered by Historic England for Grade II listing when it was unexpectedly demolished on 8 April 2015 by its owner …
…
On 12 April 2021, the pub reopened …
These may help you to understand what Secure Boot is.
https://learn.microsoft.com/en-us/windows-hardware/design/device-experiences/oem-secure-boot
The original interview is no longer available, but here are references.
https://www.theregister.com/2013/08/24/top_10_steve_ballmer_quotes_from_microsoft_history/
“Ballmer: I may have called Linux a cancer but now I love it” https://www.zdnet.com/article/ballmer-i-may-have-called-linux-a-cancer-but-now-i-love-it/
“Former Microsoft CEO Ballmer does about-face on Linux technology” https://www.reuters.com/article/us-microsoft-ballmer-linux-idUSKCN0WC2RA/