Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
Easy. Check the traces going out of the buzzer. If one of them (assuming it has 2) goes to ground, then you can just clip both legs (or desolder) and leave it like that.
Btw, can you just ripp the beeper out or need to replace with a resistor?
Easy. Check the traces going out of the buzzer. If one of them (assuming it has 2) goes to ground, then you can just clip both legs (or desolder) and leave it like that.