Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
I cut out the bended upward part, then filed down the corners and gave it a slight bent. It originally was black ano so I wet sanded it with 1000 grit, give it a quick polish and then heat anodized. I used gas stove so finish isn’t as uniform as I would like, but it’s good enough. Here is a link to the clip I used: https://wurkkos.com/products/pocket-clip-for-ts10-fc12-hd15-hd20-ts25?VariantsId=10675
The new two way black clip from Wurkkos.
And you straightened the bend? Or the TS25 one and you cut it? Either way the colouring looks fine!
I cut out the bended upward part, then filed down the corners and gave it a slight bent. It originally was black ano so I wet sanded it with 1000 grit, give it a quick polish and then heat anodized. I used gas stove so finish isn’t as uniform as I would like, but it’s good enough. Here is a link to the clip I used: https://wurkkos.com/products/pocket-clip-for-ts10-fc12-hd15-hd20-ts25?VariantsId=10675