Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
If you want to continue pushing the S1 you need to take a look at independent X and Y accels and speeds. Slinging the heavy bed is the limiting factor in speed and accel
I’ve managed to get to ~12m with 250mms@3k on Y and 450mms@10k on X.
You just need to download piezos limited_cartesian.py and put it in your kinematics folder.
Then you can easily switch between by changing the kinematics option in your cfg.
I wanted to do linear rails as well but decided against it and put the money towards a VzBot and my DIY build.
If you want to continue pushing the S1 you need to take a look at independent X and Y accels and speeds. Slinging the heavy bed is the limiting factor in speed and accel
I’ve managed to get to ~12m with 250mms@3k on Y and 450mms@10k on X.
This requires patching Klipper, right? I don’t think I want to bother with maintaining a fork.
Though I designed a Z axis brace and plan to add some X/Y linear rails.
You just need to download piezos limited_cartesian.py and put it in your kinematics folder. Then you can easily switch between by changing the kinematics option in your cfg.
I wanted to do linear rails as well but decided against it and put the money towards a VzBot and my DIY build.