Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
It’s not very expensive not to populate the USB receptacle on the the PCB.
Sealing the hole in the case would be easy. You could have an removable insert in the case’s injection mold so there’s the option not to have the hole.
If they thought two case parts were too logistically complicated, or they already made the mold and don’t want to mill it out to make space for the insert, they could insert plastic plugs with permanent snaps.
If they really didn’t care, they could even just put they sticker over the hole in front of an unpopulated port.
I mean the sticker has a peel up icon on the corner. They’re obviously not trying to hide this, they’re just pushing the user towards wifi.
Also a custom firmware bound by serial number ranges would be even cheaper than the sticker. Logic doesn’t hold up
You are absolutely correct.
It’s not very expensive not to populate the USB receptacle on the the PCB.
Sealing the hole in the case would be easy. You could have an removable insert in the case’s injection mold so there’s the option not to have the hole.
If they thought two case parts were too logistically complicated, or they already made the mold and don’t want to mill it out to make space for the insert, they could insert plastic plugs with permanent snaps.
If they really didn’t care, they could even just put they sticker over the hole in front of an unpopulated port.
Yeah, but we can’t be angry about that.