Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
If only more people realised this or could spare the 30 minutes it takes to educate themselves. I recently replaced the battery and charging port on an “old” Samsung phone (three years or so) and it’s as good as new. While I did use my 3D printer to soften the glue, I’ve been able to do the same with a hairdryer in the past. All you need is a couple of guitar picks or a set you can buy for next to nothing.
If only more people realised this or could spare the 30 minutes it takes to educate themselves. I recently replaced the battery and charging port on an “old” Samsung phone (three years or so) and it’s as good as new. While I did use my 3D printer to soften the glue, I’ve been able to do the same with a hairdryer in the past. All you need is a couple of guitar picks or a set you can buy for next to nothing.
omg… fuck, totally forgot i could have used the printing bed for that… used a hair-dryer, worked too