Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
Anycubic mono 4k is a fantastic deal, $169.00 right now, it’s basically the cost of a combat patrol.
And the anycubic ultra DLP is great as well at sub $300.
I have had great success with both the mono 4k and the D2 (updated ultra). My D2 has been running non-stop for about 3 months now with only a few misprints, all user error.
If you have any questions about either I would be more than happy to answer them to the best of my ability.
I mean I spent about 500$ CAD for the washer/curing station and the printer. I feel like it was a steal considering how much I have saved on model costs.
Well i never bought a single model because it’s too costy to begin with 🙃 500Cad is indeed a good deal ! But i’ve heard that calibrating process and troubleshooting are much more tedious than on a fdm and quite costly and the resin itself is a bit pricy too :/
Can’t comment on the noise, but with resin printers I know the biggest problem is the gasses they emit. You need to print in like a garage with the fan on, its not recommended to print inside a small area with low air circulation.
Man i’d kill for a reliable/affordable resine printer !
Anycubic mono 4k is a fantastic deal, $169.00 right now, it’s basically the cost of a combat patrol.
And the anycubic ultra DLP is great as well at sub $300.
I have had great success with both the mono 4k and the D2 (updated ultra). My D2 has been running non-stop for about 3 months now with only a few misprints, all user error.
If you have any questions about either I would be more than happy to answer them to the best of my ability.
This is really nice of you ! Thanks for the info !
I mean I spent about 500$ CAD for the washer/curing station and the printer. I feel like it was a steal considering how much I have saved on model costs.
Well i never bought a single model because it’s too costy to begin with 🙃 500Cad is indeed a good deal ! But i’ve heard that calibrating process and troubleshooting are much more tedious than on a fdm and quite costly and the resin itself is a bit pricy too :/
Resin printing is basically plug and play at this point.
Glad to hear that ! Sorry to bother with question, but is it noisy ? My fdm is so fucking loud, is it the same for resin ? Thank you for your intel !
Can’t comment on the noise, but with resin printers I know the biggest problem is the gasses they emit. You need to print in like a garage with the fan on, its not recommended to print inside a small area with low air circulation.
Didn’t know about that good to know !
No my resin printer is a lot quieter than my FDM one.
Great ! Thanks !