Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
A good thing to keep in mind is that you should match voltages, but with amps the cord just has to be equal or higher than the device. It’s a rating of what the cord can provide, not what it’s spitting out at all times like voltage.
So in your example of 12v 900ma, a 12v cord thats 1a or greater should work fine assuming the barrel is the same. This can also help declutter anyone’s ‘collections’…if you have a whole mess of 12v cords, you can safely ditch the lower amp ones.
12v 900ma…. Hmm… let me check my box of assorted plugs
Ah, negative tip!
A good thing to keep in mind is that you should match voltages, but with amps the cord just has to be equal or higher than the device. It’s a rating of what the cord can provide, not what it’s spitting out at all times like voltage.
So in your example of 12v 900ma, a 12v cord thats 1a or greater should work fine assuming the barrel is the same. This can also help declutter anyone’s ‘collections’…if you have a whole mess of 12v cords, you can safely ditch the lower amp ones.