Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
My guess is cost and size. Those robots aren’t cheap and need a cell around them (the yellow device screwed to the table edge). To make it worse as they put a lot of weight on a small footprint you might need to locally reinforce the foundation. Additionally, the printer needs likely 2x or even more floor space compared to the build plate/print volume.
They do exist. For example, a maker space in southern Germany has one of those on display. Not due to it being practical but because they got their hand on a robot and tinkered with it.
My guess is cost and size. Those robots aren’t cheap and need a cell around them (the yellow device screwed to the table edge). To make it worse as they put a lot of weight on a small footprint you might need to locally reinforce the foundation. Additionally, the printer needs likely 2x or even more floor space compared to the build plate/print volume.
They do exist. For example, a maker space in southern Germany has one of those on display. Not due to it being practical but because they got their hand on a robot and tinkered with it.