Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
We need to start to fill up lemmy :) Can you solve this issue? My HEVO
(Hypercube Evolution), now 5 years old started to have very weird banding. It
has a Bowden BMG Extruder and a E3D V6 printhead with CHT-Nozzle. MKS Robin with
TMC2209 and Klipper. Benchy is ABS, lower one is HIPS. Printed at 230°/105° bed.
part cooling fan off. I took apart and cleaned the extruder. The gears look
intact and i can move the extruder by hand without binding. I found the E3D V6
was loose. I retightened it, which didn’t solve the issue. I’ll spend a beer to
the one that solves this issue ;)
Clickable community link for other Lemmy users: [email protected]
Thx… I thought it was something with an !.. but the part at the end i missed lol.