Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
It seems like it would but the pivpn install script always hangs on me whether i I select openvpn or wireguard. Based on some reading I was lead to believe I needed to just use raw openvpn for a TAP interface. I’ve tried a few times but I always end up with CA issues or just flat out failure to connect.
It should be pretty simple, I’m just trying to bridge my network to a single remote device connected via cellular gateway. Maybe I’m just out of my depth. I’ve done it before with an old NAS years ago but I’ve tried a few step by step guides and no dice.
PiVPN was actually one of the things I thought the HW handled pretty well. Other than how much it ends up getting throttled by the 100Mbps link.
It seems like it would but the pivpn install script always hangs on me whether i I select openvpn or wireguard. Based on some reading I was lead to believe I needed to just use raw openvpn for a TAP interface. I’ve tried a few times but I always end up with CA issues or just flat out failure to connect.
It should be pretty simple, I’m just trying to bridge my network to a single remote device connected via cellular gateway. Maybe I’m just out of my depth. I’ve done it before with an old NAS years ago but I’ve tried a few step by step guides and no dice.
If you have any tips that’d be great!
Wish I could help.
I used it a few years ago for a simple wireguard link but eventually moved the vpn into my opnsense instance