Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
Everfuel will close, pause, divest or repurpose light-duty filling stations throughout Nordics, due to lack of profitability and non-compliance with AFIR
Hydrogen is very light, so the energy per kilogram is quite high.
However, hydrogen is also naturally not very dense. Hydrogen at 1 atmosphere has a tiny fraction of the energy of a similar volume of batteries. Pressurized hydrogen is similarly dense to a battery, and liquid hydrogen is about twice as dense.
So to make hydrogen dense, you need a very thick, heavy tank to hold the pressurized hydrogen. That significantly cuts into your weight advantages.
Add to that, fuel cells are very inefficient at converting hydrogen to usable electricity.
Maybe I’m missing other conversion factors, but hydrogen has a volumetric energy density of 9MJ/L which is about 2.5kWh/L compared to about 1.7kWh/L for the newest Tesla batteries. So hydrogen is more energy dense than batteries even by volume.
Hydrogen is very light, so the energy per kilogram is quite high.
However, hydrogen is also naturally not very dense. Hydrogen at 1 atmosphere has a tiny fraction of the energy of a similar volume of batteries. Pressurized hydrogen is similarly dense to a battery, and liquid hydrogen is about twice as dense.
So to make hydrogen dense, you need a very thick, heavy tank to hold the pressurized hydrogen. That significantly cuts into your weight advantages.
Add to that, fuel cells are very inefficient at converting hydrogen to usable electricity.
Maybe I’m missing other conversion factors, but hydrogen has a volumetric energy density of 9MJ/L which is about 2.5kWh/L compared to about 1.7kWh/L for the newest Tesla batteries. So hydrogen is more energy dense than batteries even by volume.
Aren’t those the numbers for liquid hydrogen?
Oh maybe. That would make extra complications. Looks like low pressure gas is 0.5 kWh/L which is more in line with what you were saying.