Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
Everfuel will close, pause, divest or repurpose light-duty filling stations throughout Nordics, due to lack of profitability and non-compliance with AFIR
I hadn’t thought of it before but it’s obvious, hydrogen is a gas at room temperature, it had to be stored under pressure in order to get any significant mass into the volume of a tank. So it’s under pressure in the refueling station and in the car’s tank. How does it get from one to the other without boiling away?
Hydrogen is a gas, under very high pressure but you will never find it in a liquid form unless you cool it down to -250 C or so. It’s not used in liquid form for such applications.
There is though the need to chill the hydrogen to about -20/-40C before delivery to the vehicles due to some anomalous properties of hydrogen respect to ever other gas known to humans.
oh there are a few ways. One group is researching turning H2 into a paste. the paste mixes with water and breaks down into water and Ca+ ions. You now have a energy density around liquid hydrogen and it only add some calcium to the exhaust. There is also storing hydrogen in metal disks.
I hadn’t thought of it before but it’s obvious, hydrogen is a gas at room temperature, it had to be stored under pressure in order to get any significant mass into the volume of a tank. So it’s under pressure in the refueling station and in the car’s tank. How does it get from one to the other without boiling away?
Hydrogen is a gas, under very high pressure but you will never find it in a liquid form unless you cool it down to -250 C or so. It’s not used in liquid form for such applications.
There is though the need to chill the hydrogen to about -20/-40C before delivery to the vehicles due to some anomalous properties of hydrogen respect to ever other gas known to humans.
oh there are a few ways. One group is researching turning H2 into a paste. the paste mixes with water and breaks down into water and Ca+ ions. You now have a energy density around liquid hydrogen and it only add some calcium to the exhaust. There is also storing hydrogen in metal disks.