Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
This is about hacking WiFi hardware to make WiFi modulated signal intelligible to a receiver expecting CSS modulation, and have the WiFi hardware demodulate a CSS signal.
Thus making WiFi chips work with LoRa chips.
LoRa doesn’t care about the carrier frequency.
So the fact that it’s LoRa at 2.4ghz doesn’t matter. It’s still LoRa.
I’m sure there will be a use for this at some point.
Certainly useful for directly interfacing with LoRa devices from a laptop.
I feel that anyone actually deploying LoRa IoT would be working at a lower level than “throw a laptop at it” kinda thing
I didn’t realize that LoRa didn’t care about carrier frequency, that’s for sure the root of my faulty assumption! Thanks for taking the time to explain
It’s pretty serendipitous, actually.
The past month I’ve done a somewhat deep dive into LoRa for a project.
I ultimately dismissed it due to the data rates, but for simple remote controls or for sensors - things that report a couple bytes - it seems awesome.
I’m sure you can squeeze higher data rates out of it, but when I evaluated it I decided to go with a hardwired network link (I had to have stability, dropped info wasn’t an option. But the client had a strong preference for wireless)
WiFi uses BPSK/QPSK/OFDM/OFDMA modulation.
LoRa uses CSS modulation.
This is about hacking WiFi hardware to make WiFi modulated signal intelligible to a receiver expecting CSS modulation, and have the WiFi hardware demodulate a CSS signal.
Thus making WiFi chips work with LoRa chips.
LoRa doesn’t care about the carrier frequency.
So the fact that it’s LoRa at 2.4ghz doesn’t matter. It’s still LoRa.
I’m sure there will be a use for this at some point.
Certainly useful for directly interfacing with LoRa devices from a laptop.
I feel that anyone actually deploying LoRa IoT would be working at a lower level than “throw a laptop at it” kinda thing
I didn’t realize that LoRa didn’t care about carrier frequency, that’s for sure the root of my faulty assumption! Thanks for taking the time to explain
It’s pretty serendipitous, actually.
The past month I’ve done a somewhat deep dive into LoRa for a project.
I ultimately dismissed it due to the data rates, but for simple remote controls or for sensors - things that report a couple bytes - it seems awesome.
I’m sure you can squeeze higher data rates out of it, but when I evaluated it I decided to go with a hardwired network link (I had to have stability, dropped info wasn’t an option. But the client had a strong preference for wireless)