Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
It is. Making anything easier to disassemble requires connectors which are a huge tradeoff in terms of space Vs features. Screws take a whole lot of space especially in something you want as thin as possible such as a watch.
Nowadays the direction is embedding of passive and even active components directly into the PCB layers and an increase of the number of layers. That means that if any of them fails there’s nothing to be done, or at least not without equipments that cost way too much to be worthwhile to anyone.
In a few years, microelectronic systems will be mostly just one big custom die with the processing units and all accompanying mosfet, inductors, capacitors and resistors directly etched into a 25 layers PCB with barely any surface mounted components. Even lithium batteries can been embedded and most likely will.
If you want something totally serviceable you will have to sacrifice on size.
It is. Making anything easier to disassemble requires connectors which are a huge tradeoff in terms of space Vs features. Screws take a whole lot of space especially in something you want as thin as possible such as a watch.
Nowadays the direction is embedding of passive and even active components directly into the PCB layers and an increase of the number of layers. That means that if any of them fails there’s nothing to be done, or at least not without equipments that cost way too much to be worthwhile to anyone.
In a few years, microelectronic systems will be mostly just one big custom die with the processing units and all accompanying mosfet, inductors, capacitors and resistors directly etched into a 25 layers PCB with barely any surface mounted components. Even lithium batteries can been embedded and most likely will.
If you want something totally serviceable you will have to sacrifice on size.
Sure, but people probably don’t expect ram slots on a smart watch. Just a replaceable screen, housing, mobo, dials, and battery would do a lot.