Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
Looking at the test print, the next step might be to have a separate tool to mill the 3D printed surface so you have good tolerances. E3Ds ASMBL toolchanger had something like that. But collecting the metal shavings in vacuum and microgravity could be a problem :D
Looking at the test print, the next step might be to have a separate tool to mill the 3D printed surface so you have good tolerances. E3Ds ASMBL toolchanger had something like that. But collecting the metal shavings in vacuum and microgravity could be a problem :D
Magnets maybe?