Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
I used to be a reseller of this highly specialized navigation software. The licensing was handled via hardware fingerprinting of the harddrive. I’m not 100% sure on how it worked, but it grabbed some raw data off of the boot device, and from that generated a fingerprint. This fingerprint was then sent to the guys who made the software, and they would then send us a license key and a hefty bill. The license key only worked with syatems running off of that particular harddrive. If a customer had a harddrive failure, we had to send them the actual harddrive for them to verify, so they would issue a free key to whichever replacement drive was used.
I did a lot of experimenting with that software. It was linux based and very tweakable, but the licensing part of it was a bit of a mystery. I managed to crack it through some surprisingly simple out-of-the-box thinking, but one limitation I could never figure out how to circumvent was its refusal to generate a fingerprint from virtual drives.
For starters, it only worked with drives registering as /dev/hdX or /dev/sdX. Anything outside of that and it wouldn’t generate a fingerprint.
This was especially frustrating when a well-paying customer offered a nice bonus if we could install it on a macbook for him. After a few days of tweaking I managed to install and run it, only to discover that fingerprinting the drive couldn’t be done due to the device node being/dev/nvmeSomething. And after avfew more days of hacking I managed to fake that too, and they outright refused to issue a license due to them not wanting to support our unofficial hacks.
Where was I going with this? Oh, right, vmware… i never managed to get it to run in vmware. We had this other well paying customer who wanted the ability to alt-tab between the software and Windows. Unfortunately, any fingerprinting done from within vmware, regardless how I set up the storage, resulted in a fingerprint file with no data.
Fun fact: the software ui was written in raw xlib. I got to know the owner and lead dev fairly well, and he hinted that the codebase was a complete mess to the point where something as simple as an input dialog for a config option I recommended was A LOT of work.
I used to be a reseller of this highly specialized navigation software. The licensing was handled via hardware fingerprinting of the harddrive. I’m not 100% sure on how it worked, but it grabbed some raw data off of the boot device, and from that generated a fingerprint. This fingerprint was then sent to the guys who made the software, and they would then send us a license key and a hefty bill. The license key only worked with syatems running off of that particular harddrive. If a customer had a harddrive failure, we had to send them the actual harddrive for them to verify, so they would issue a free key to whichever replacement drive was used.
I did a lot of experimenting with that software. It was linux based and very tweakable, but the licensing part of it was a bit of a mystery. I managed to crack it through some surprisingly simple out-of-the-box thinking, but one limitation I could never figure out how to circumvent was its refusal to generate a fingerprint from virtual drives.
For starters, it only worked with drives registering as /dev/hdX or /dev/sdX. Anything outside of that and it wouldn’t generate a fingerprint.
This was especially frustrating when a well-paying customer offered a nice bonus if we could install it on a macbook for him. After a few days of tweaking I managed to install and run it, only to discover that fingerprinting the drive couldn’t be done due to the device node being/dev/nvmeSomething. And after avfew more days of hacking I managed to fake that too, and they outright refused to issue a license due to them not wanting to support our unofficial hacks.
Where was I going with this? Oh, right, vmware… i never managed to get it to run in vmware. We had this other well paying customer who wanted the ability to alt-tab between the software and Windows. Unfortunately, any fingerprinting done from within vmware, regardless how I set up the storage, resulted in a fingerprint file with no data.
Fun fact: the software ui was written in raw xlib. I got to know the owner and lead dev fairly well, and he hinted that the codebase was a complete mess to the point where something as simple as an input dialog for a config option I recommended was A LOT of work.