Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
I have started work on splitting up parts of the Sushi Train into smaller factories. The thing I liked about the Sushi Train was that if one of the assemblers/manufacturers/etc weren’t producing anything anymore, then another could use the same building resource instead. That way you don’t end up wasting ingot/ore production because the assemblers are idle. As an example, I have moved copper sheet, ingot and wire construction (mostly) next to the miner and each of the 3 can use 100% of the miners output. That way resources are only wasted if both constructors are idle and no ingots are needed elsewhere.
I have started work on splitting up parts of the Sushi Train into smaller factories. The thing I liked about the Sushi Train was that if one of the assemblers/manufacturers/etc weren’t producing anything anymore, then another could use the same building resource instead. That way you don’t end up wasting ingot/ore production because the assemblers are idle. As an example, I have moved copper sheet, ingot and wire construction (mostly) next to the miner and each of the 3 can use 100% of the miners output. That way resources are only wasted if both constructors are idle and no ingots are needed elsewhere.