Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
I have an MSI and needed to change ‘CPU Lite Load’ from Mode 9 to 13. You can then test with the XTU utility and AVX2 stress test to see if it fixed it
Unfortunately this is a separate issue. The main problem that is blowing up now is that the CPUs are rapidly degrading to the point of failure even with completely standard settings and normal usage. And ironically, boosting the voltage to solve the issue you’re talking about might then accelerate the degradation issue, because the leading theory seems to be that the high voltage that i9s use is frying the ringbus.
All around just a terrible situation for Intel and their customers
Check this out - I fixed mine using this. Mine was basically undervolted https://community.intel.com/t5/Processors/Unstable-i7-14700k/m-p/1569028
I have an MSI and needed to change ‘CPU Lite Load’ from Mode 9 to 13. You can then test with the XTU utility and AVX2 stress test to see if it fixed it
Unfortunately this is a separate issue. The main problem that is blowing up now is that the CPUs are rapidly degrading to the point of failure even with completely standard settings and normal usage. And ironically, boosting the voltage to solve the issue you’re talking about might then accelerate the degradation issue, because the leading theory seems to be that the high voltage that i9s use is frying the ringbus.
All around just a terrible situation for Intel and their customers
deleted by creator
Yeah I’m getting an RMA. This solution gave me stability in the mean time though. I still have to pay shipping/handling though
Lmao I think I was undervolting it to try and improve stability. I’ll try the opposite, even if it does chew through the processor a bit quicker.
Watch the temp. >90C is too high