Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
I sand the surface with 220 grit then apply two coats of acrylic enamel. While the paint is still wet, pock the surface in random locations with a blunted nail and score here and there with a dull screwdriver. When dry, I coat with a thinned down acrylic matte black then wipe with damp rag to smear into cracks and expose the color. Finish with a good polyurethane.
I sand the surface with 220 grit then apply two coats of acrylic enamel. While the paint is still wet, pock the surface in random locations with a blunted nail and score here and there with a dull screwdriver. When dry, I coat with a thinned down acrylic matte black then wipe with damp rag to smear into cracks and expose the color. Finish with a good polyurethane.
What a distressing miscommunication.
Is this like physical smoothing of surfaces haha?
Any photos of the results? If it’s not too bloody!