Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
Remember to leave a 5 cm gap around the fridge sides AND TOP to ensure that the heat exchange element gets enough air circulation to work properly. 10 cm is even better. Cutting a generous hole in the base of the cabinet and fitting a small fan to blow air through the hole will help the fridge work better too. Otherwise you’ll spend a lot of time defrosting the fridge and a lot of energy running it. Ikea has paper tape measures for free that are good for a limited number of uses, and you can write on them with a biro - eg width measurement and height measurement of cupboard.
Thanks TW. I meant wardrobe, not cupboard (I basically call everything a cupboard). Unfortunately it’s built into the walls so cutting anything is off the table, but I’ll remember to keep it back from the wall.
Remember to leave a 5 cm gap around the fridge sides AND TOP to ensure that the heat exchange element gets enough air circulation to work properly. 10 cm is even better. Cutting a generous hole in the base of the cabinet and fitting a small fan to blow air through the hole will help the fridge work better too. Otherwise you’ll spend a lot of time defrosting the fridge and a lot of energy running it. Ikea has paper tape measures for free that are good for a limited number of uses, and you can write on them with a biro - eg width measurement and height measurement of cupboard.
Thanks TW. I meant wardrobe, not cupboard (I basically call everything a cupboard). Unfortunately it’s built into the walls so cutting anything is off the table, but I’ll remember to keep it back from the wall.