• Radioactive Radio@lemm.ee
    link
    fedilink
    English
    arrow-up
    5
    arrow-down
    1
    ·
    1 year ago

    It’s not that hard, it’s printed with a huge soft industrial tiddy. You just have to line it up on the flat stamp thingy, which should be easy, probably.

    • Hazdaz@lemmy.world
      link
      fedilink
      English
      arrow-up
      6
      arrow-down
      1
      ·
      1 year ago

      You are way underestimating it.

      Ceramics are never super tight in tolerance, and a tiddy is a soft, deformable shape that will never deform exactly the same every time, plus it needs to be moved and compressed around the part. You get any of those off by even a little and you get misalignment.

      • bufordt@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        6
        ·
        edit-2
        1 year ago

        You won’t ever get this type of misalignment with the tiddy method. You can get distortion of the pattern.

        • Hazdaz@lemmy.world
          link
          fedilink
          English
          arrow-up
          5
          ·
          1 year ago

          Very true, but the person above was downplaying how difficult aligning things would be. You are right that with the tiddy method, the rubber/silicone (I assume that’s what they are made of) comes down in one shot so the pattern could distort, but not misalign as shown.

          • bufordt@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            3
            ·
            1 year ago

            The original picture was almost certainly a ceramic glaze decal that would be very hard to get to line up perfectly.

            Even with slip cast porcelain, where the actual ceramic piece isn’t going to vary that significantly from casting to casting, it still would take some expertise to apply it without a very visible seam.

          • bufordt@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            The original picture was almost certainly a ceramic glaze decal that would be very hard to get to line up perfectly.

            Even with slip cast porcelain, where the actual ceramic piece isn’t going to vary that significantly from casting to casting, it still would take some expertise to apply it without a very visible seam.

    • HeyThisIsntTheYMCA@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Are they industrially known as printing tiddies or am I gonna get giggled at (not that I mind) when I go buy one for home projects?