Warning: Some posts on this platform may contain adult material intended for mature audiences only. Viewer discretion is advised. By clicking ‘Continue’, you confirm that you are 18 years or older and consent to viewing explicit content.
The pin was crushed by the previous owner. I was able to remove enough plastic to expose the conductor. Then I used my 0.1mm soldering tip to solder a small jumper from the crushed pin directly to the stick of ram.
The pin was crushed by the previous owner. I was able to remove enough plastic to expose the conductor. Then I used my 0.1mm soldering tip to solder a small jumper from the crushed pin directly to the stick of ram.
Are you MacGyver?
I wonder how tf they managed to crush just one pin. Also, if I understand this correctly, the motherboard now uhh… features integrated ram?
Hybrid Integrated™
Run 4 passes of Memtest86+ on it. 🥹
Haven’t done that yet, but it’s pin 236 on DDR3 240 pin ram which I believe is a power rail, so low risk of issues.
Oh yeah, you’re probably right if it’s just power.